Wells WVAE-55FS Instrukcje Operacyjne Strona 29

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 29
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 28
Operation and Care Manual #8452/53/55
Alto-Shaam, Inc. warrants to the original purchaser that any original part that is
found to be defective in material or workmanship will, at our option, subject to
provisions hereinafter stated, be replaced with a new or rebuilt part.
The labor warranty remains in effect one (1) year from installation or fifteen (15)
months from the shipping date, whichever occurs first. Alto-Shaam will bear
normal labor charges performed during standard business hours not subject to
overtime, holiday rates, or any additional fees.
The parts warranty remains in effect one (1) year from installation or fifteen (15)
months from the shipping date, whichever occurs first.
This warranty does not apply to:
1. Safety thermostat, circuit breaker and overload protector reset or fuse
replacement unless specifically warranted.
2. Any and all malfunction due to operation at voltages other than specified
on the equipment. Conversion to correct voltage and phase are the
responsibility of the purchaser.
3. Any and all problems due to electrical connections not in accordance with
electrical code requirements and the wiring diagrams supplied with the
equipment.
4. Calibration of heat controls on original components after the first sixty
(60) days.
5. Replacement of items subject to normal wear. Such items include but are
not limited to knobs, light bulbs, baskets, grids, mechanical timers,
thermocouples, fuses and indicating lights.
6. Normal maintenance functions including lubrication, adjustments of air-flow,
thermostats, door mechanisms, microswitches, burners and pilot burners.
7. Installation labor, inspection, and start-up are not considered warranty items.
8. Charges incurred by delays or operational restrictions which hinder the ability
of a service technician to perform service are not covered by warranty.
9. Equipment damage caused by accident, shipping, improper installation or
alteration.
10. Equipment used under conditions of abuse, misuse, carelessness or
abnormal conditions including equipment subjected to harsh or
inappropriate chemicals, poor water quality or equipment with missing or
altered serial numbers.
11. Any losses or damages resulting from malfunction, including loss of
product or consequential or incidental damages of any kind.
12. Equipment modified in any manner from original model, substitution of
parts other than factory authorized parts, removal of any parts or
addition of any parts.
Alto-Shaam factory authorized replacement parts are warranted for ninety
(90) days from date of purchase on non-warranty equipment. Replacement
parts warranty is limited to the defective part only. The use of parts other
than factory authorized Alto-Shaam replacement parts completely voids
warranty coverage.
This warranty is exclusive and is in lieu of all other warranties, expressed or
implied, including the implied warranties of merchantability and fitness for
purpose. In no event shall the Company be liable for loss of use, loss of
revenue, or loss of product or profit, or for indirect or consequential damages.
This warranty is in lieu of all other warranties expressed or implied and Alto-
Shaam, Inc. neither assumes or authorizes any persons to assume for it any
other obligation or liability in connection with Alto-Shaam equipment.
W164 N9221 Water Street
P.O. Box 450
Menomonee Falls, Wisconsin 53052-0450
U.S.A.
PHONE: 262.251.3800 FAX: 262.251.7067
800.329.8744 U.S . A ./CANADA
WEBSITE:
800.558.8744 U.S . A ./CANADA 262.251.1907 INTERNATIONAL
WWW.alto-shaam.com
PRINTED IN U.S .A .
RECORD THE MODEL AND SERIAL NUMBER OF THE FRYER FOR EASY REFERENCE. ALWAYS REFER TO
BOTH MODEL AND SERIAL NUMBER IN ANY CONTACT WITH ALTO-SHAAM REGARDING THE FRYER.
Model Number: _____________________________________ Date Installed: _____________________________________
Voltage: ____________________________________________ Purchased From: ____________________________________
Serial Number: ______________________________________ ____________________________________________________
All Alto-Shaam equipment is sold F.O.B.
shipping point, and when accepted by the carrier,
such shipments become the property of
the consignee.
Should damage occur
in shipment, it is a
matter between the
carrier and the consignee.
In such cases, the carrier is
assumed to be responsible for the safe delivery of
the merchandise, unless negligence can be
established on the part of the shipper.
1. Make an immediate inspection while the
equipment is still in the truck or immediately
after it is moved to the receiving area. Do not
wait until after the material is moved to a
storage area.
2. Do not sign a delivery receipt or a freight bill
until you have made a proper count and
inspection of all merchandise received.
3. Note all damage to packages directly on the
carriers delivery receipt.
4. Make certain the driver signs this receipt. If he
refuses to sign, make a notation of this refusal
on the receipt.
5. If the driver refuses to allow inspection, write
the following on the delivery receipt:
Driver refuses to allow inspection
of containers for visible damage.
6. Telephone the carriers office immediately upon
finding damage and request an inspection. Mail
a written confirmation of the time, date, and the
person called.
7. Save any packages and packing material for
further inspection by the carrier.
8. Promptly file a written claim with the carrier
and attach copies of all supporting paperwork.
We will continue our policy of assisting our
customers in collecting claims which have been
properly filed and actively pursued. We cannot,
however, file any damage claims for you, assume
the responsibility of any claims, nor accept
deductions in payment for such claims.
ALTO-SHAAM, INC.
FRYER
Original Equipment
Limited
Warranty
TRANSPORTATION
DAMAGE AND CLAIMS
Przeglądanie stron 28
1 2 ... 24 25 26 27 28 29

Komentarze do niniejszej Instrukcji

Brak uwag